Page 2
For technical questions, please call 1-800-444-3353.
SKU 67631
Recommended minimum WiRe
gauge FoR eXtenSion coRdS
(240 Volt)
nameplate
ampeReS
(at full load)
eXtenSion coRd
length
50’ 100’ 200’ 300’
0 – 6
18
16
16
14
6.1 – 10
18
16
14
12
10.1 – 12
16
16
14
12
12.1 – 16
14
12
do not use.
table a
SaVe thiS manual
Keep this manual for the safety warnings
and precautions, assembly, operating,
inspection, maintenance and cleaning
procedures. Write the product’s serial number
in the back of the manual near the assembly
diagram (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
impoRtant SaFety
inFoRmation
in this manual, on the labeling, and
all other information provided with
this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. obey all
safety messages that follow
this symbol to avoid possible
injury or death.
dangeR indicates a
hazardous situation
which, if not avoided, will result
in death or serious injury.
WaRning indicates a
hazardous situation
which, if not avoided, could
result in death or serious injury.
caution, used with
the safety alert
symbol, indicates a hazardous
situation which, if not avoided,
could result in minor or moderate
injury.
notice is used to
address practices not
related to personal injury.
caution, without the
safety alert symbol, is
used to address practices not
related to personal injury.
general tool Safety Warnings
WaRning Read all safety warnings
and instructions.
Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Save all warnings and instructions
for future reference.
KEEP WORK AREA CLEAN. Cluttered
1.
areas and benches invite accidents.
DON’T USE IN DANGEROUS
2.
ENVIRONMENT. Don’t use power tools
in damp or wet locations, or expose them
to rain. Keep work area well lighted.
KEEP CHILDREN AWAY. All visitors
3.
should be kept safe distance from work
area.
MAKE WORKSHOP KID PROOF
4.
with padlocks, master switches, or by
removing starter keys.
DON’T FORCE TOOL. It will do the job
5.
better and safer at the rate for which it
was designed.
USE RIGHT TOOL. Don’t force tool or
6.
attachment to do a job for which it was
not designed.
