SKU 66523
For technical questions, please call 1-800-444-3353.
Page 11
press the appropriate Breaker to reset
the Generator and continue operation.
(See Figure F.)
FIGuRE F
AC
CIRCuIT BREAKER
dC
CIRCuIT BREAKER
Calculating Power draw:
Power draw can be calculated by mul-
1.
tiplying
volts
and
amps
. The resulting
number is
wattage
.
Never exceed the rated maximum
•
wattage (1300) for the Generator or
either outlet.
Refer to appliance/tool owner’s
•
manuals to determine the wattage of
electrical load devices.
Long power cords and extension
•
cords draw additional power. Keep
cord length at a minimum.
(See Figure G.)
FIGuRE G
AC Application:
Allow the Engine to run at no load
1.
until warm (approx. 3 minutes) after
each start-up to allow the Engine to
stabilize.
Plug the power cord of the 120 volt
2.
appliance/tool into the 120 volt AC
Outlet on the Generator.
(See Figure H.)
When finished using the appliance/
3.
tool, unplug its power cord from the
AC Outlet on the Generator.
(See Figure H.)
FIGuRE H
AC OuTLET
dC OuTLET
