Page 11
For technical questions, please call 1-888-866-5797.
Item 62422
Bevel and Metal Cutting
1. Use the included Hex Key to loosen the
Cap Screw (21) on the bottom of the
Base Plate (19). Tilt the base, allowing
for bevel cuts between 0 and 45°.
2. Retighten the Cap Screw once the
desired angle is reached.
3. For metal cutting, be sure to use a coolant
such as cutting oil during use. Failure to
add coolant will lead to greater blade wear.
If desired, grease the underside of the
work piece in place of adding coolant.
4. When finished with the Jigsaw, unlock and
release the Trigger to stop the Jigsaw. Wait
until the Saw Blade stops completely. Then,
remove the Jigsaw from the work piece.
5. To prevent accidents disconnect the
power cord after use. Clean, then store
the tool indoors out of children’s reach.
