background image

Page 5

For technical questions, please call 1-800-444-3353.

Item 60713 

        

SAFET

y

O

PERA

TION

M

AINTENAN

c

E

SETUP

14. 

Do not operate the power tool near flammable 

materials. Sparks could ignite these materials.

15. 

Do not use accessories that require liquid 

coolants. Using water or other liquid coolants 

may result in electrocution or shock.

16. Maintain labels and nameplates on the tool.  

These carry important safety information.  

If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

17. Avoid unintentional starting.  

Prepare to begin work before turning on the tool.

18. Do not depress the spindle lock when 

starting or during operation.

19. Do not leave the tool unattended when it is plugged 

into an electrical outlet.  Turn off the tool, and 

unplug it from its electrical outlet before leaving.

20. Use clamps (not included) or other practical 

ways to secure and support the workpiece to 

a stable platform.  Holding the work by hand 

or against your body is unstable and may 

lead to loss of control and personal injury.

21. This product is not a toy.  

Keep it out of reach of children.

22. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to heart pacemaker could cause 

pacemaker interference or pacemaker failure.  

In addition, people with pacemakers should: 

• Avoid operating alone. 

• Do not use with power switch locked on. 

• Properly maintain and inspect 

to avoid electrical shock. 

• Properly ground power cord.  Ground Fault Circuit 

Interrupter (GFCI) should also be implemented 

– it prevents sustained electrical shock.

23. WARNING: Some dust created by power sanding, 

sawing, grinding, drilling, and other construction 

activities, contains chemicals known [to the State 

of California] to cause cancer, birth defects or 

other reproductive harm.  Some examples of these 

chemicals are: 

• Lead from lead-based paints 

• Crystalline silica from bricks and cement or 

other masonry products 

• Arsenic and chromium from 

chemically treated lumber 

Your risk from these exposures varies, 

depending on how often you do this type of work.  

To reduce your exposure to these chemicals: work 

in a well ventilated area, and work with approved 

safety equipment, such as those dust masks that are 

specially designed to filter out microscopic particles.  

(California Health & Safety Code § 25249.5, 

et seq.

)

24. WARNING: Handling the cord on this product will 

expose you to lead, a chemical known to the State 

of California to cause cancer, and birth defects or 

other reproductive harm. Wash hands after handling.  

(California Health & Safety Code § 25249.5, 

et seq.

)

25. The warnings, precautions, and instructions 

discussed in this instruction manual cannot 

cover all possible conditions and situations 

that may occur.  It must be understood by the 

operator that common sense and caution are 

factors which cannot be built into this product, 

but must be supplied by the operator.

Summary of Contents for 60713

















Reviews: