SKU 47639
Page 3
2.
Keep work area clean.
Cluttered areas invite injuries
.
3.
Observe work area conditions
. Do not use machines or power tools in
damp or wet locations. Don’t expose to rain. Keep work area well lighted.
Do not use electrically powered tools in the presence of flammable gases or
liquids.
4.
Keep inverter away from any direct heat source or combustible material.
Keep well ventilated.
5.
Do not open the metal case;
risk of electric shock.
6.
Keep children away
. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
7.
Store idle equipment
. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
8.
Use the right tool for the job
. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
9.
Dress properly
. Do not wear loose clothing or jewelry as they can be caught
in moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
10.
Use eye and ear protection
. Always wear ANSI approved impact safety
goggles when using tools. Wear a full face shield if you are producing metal
filings or wood chips. Wear an ANSI approved dust mask or respirator when
working around metal, wood, and chemical dusts and mists.
11.
Do not overreach
. Keep proper footing and balance at all times. Do not
reach over or across running machines.
12.
Maintain tools with care
. Keep tools sharp and clean for better and safer
performance. Follow instructions for changing accessories. Inspect tool
cords periodically and, if damaged, have them repaired by an authorized
technician.
13.
Disconnect power
. Unplug inverter when not in use.
14.
Avoid unintentional starting
. Be sure the switch is in the Off position when
not in use and before plugging in any appliance.
15.
Stay alert
. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
47639.p65
5/23/03, 3:09 PM
3
