SKU 44829
For technical questions, please call 1-800-444-3353.
Page 2
SpeCiFiCATiOnS
Motor
120 V~ / 60 Hz / 1500 W / 1 Phase, 2 HP
Speed
3400 RPM
Blade Size
14” Diameter x 1” Arbor (Not Included)
Miter Angle
0-45° Right 0-30° Left
Table Size
9-3/4” x 10-1/4”
Cutting
Capacities
Steel Pipe - 4” Dia. x 1/4” Wall Thickness
Angle Iron - 3” x 3” x 1/2” Wall Thickness
Solid Steel - 1-3/8” Dia.
Vise Assembly and Spanner Wrench included.
SAVe THiS mAnUAl
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep the manual and invoice in a safe and dry place for future reference.
SAFeTy WArningS And preCAUTiOnS
WArning: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
read all instructions before using this product!
Avoid working alone
1.
. If an accident happens, an assistant can bring help.
Keep work area clean
2.
. Cluttered areas invite injuries.
Observe work area conditions
3.
. Don’t expose to rain. Keep work area well
lighted.
Keep children away
4.
. Children must never be allowed in the work area. Do not
let them handle machines, tools, or extension cords.
Store idle equipment
5.
. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
dress properly
6.
. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear
are recommended when working. Wear restrictive hair covering to contain long
hair.
Use eye and ear protection
7.
. Always wear ANSI approved impact safety goggles.
Wear an ANSI approved face shield when producing metal filings.
do not overreach
8.
. Keep proper footing and balance at all times. Do not reach
over or across electrical cables or frames.
reV 01i, 01k, 07g, 07h
