background image

SKU 30858   

 For technical questions please call 1-800-444-3353. 

           Page 9

5. 

Making certain NOT TO TOUCH the new Halogen Bulb (3), insert it into the Light left side 
first.

 

Do not touch the Halogen Bulb at any time.  

Oil from skin will drastically shorten the 

bulb’s life-span if not cleaned (with rubbing alcohol) before use.  Handle with a soft, clean 
cloth instead.

6. 

Insert the Bolt (2) and replace the Grid.

Operation

1. 

To turn on the Light, plug the Power Cord into a 120 volt, grounded, electrical outlet.  

 
WARNING!   Always point the light away from the wall, whether the unit is in use or not.  

If 

the unit is accidentally pointed at the wall while turned on or still hot  

 

 

 

after turned off, a fire may result.

2. 

Unplug the light to turn it off.

                               
      
                                                  

Inspection, Maintenance and Cleaning

1. 

Always unplug the Halogen Light from its electrical outlet and allow the unit to 
completely cool down before performing any inspection, maintenance, or cleaning.

2. 

Before each use:  Inspect the general condition of the Halogen Light.  Check for 
misalignment or binding of moving parts, cracked or broken parts, damaged Power Cord, 
damaged Grid, Lens and any other condition that may affect its safe operation.  If a problem 
occurs with the Light, have the problem corrected before further use.  Do not use damaged 
equipment.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL 
ONLY.  NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO 
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED 
TO REPLACE ANY PARTS OF THE PRODUCT.  IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES 
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS 
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE 
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT 
PARTS THERETO.

REV 12/06

Summary of Contents for 30858











Reviews: