background image

SKU 30858   

 For technical questions please call 1-800-444-3353. 

           Page 2

T

HANK YOU for choosing a 

HARBOR FREIGHT TOOLS 

product.  For future reference, please 

complete the owner’s record below:

Model______________ 

 

Serial No.____________  Purchase Date_______________

 

 

 

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS.  It is important that you read the 
entire manual to become familiar with the unit BEFORE you begin assembly.
 

 

 

 

 

 

 

 

Technical Specifications

Power: 

120 VAC, 60 Hz

Bulb Type: 

500 Watt Quartz Halogen

Weight: 

5-1/16 lb. 

 

Dimensions: 

8-3/4” x 8-1/4” x 12-7/8”

Swivel: 

180 degrees up and down

Includes: 

Built-in waterproof junction box and tubular steel stand

Replacement Bulbs:  Harbor Freight Tools Item #4212 and #31307

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to 
reduce the risk of personal injury and damage to equipment.

   

     

Read all instructions before using this product!

  

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow  all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1. 

Keep your work area clean and well lit.

  Cluttered benches and dark areas  

 

invite accidents.

2. 

Do not operate the Halogen Light in explosive atmospheres, such as in the presence 
of flammable liquids, gases, or dust.  

Power tools create sparks which may ignite the dust 

or fumes.

3. 

Keep bystanders, children, and visitors away while operating the Halogen Light.

 

Distractions can cause you to lose control.

E197534

Summary of Contents for 30858











Reviews: