Chicago Dryer AIR CHICAGO EXPRESS, Instruction Manual

Page: 51 / 55

Index Air Chicago Express
I-2
Clean
Air Filter/Auto Drain 4-14
Clean and Lubricate
Drive Chains 4-11
Communications and the I/O Panel, Control System
5-6
Compressed Air Supply
Checkout 2-9
Connection 2-5
Compressed Air System 7-23
About 5-10
Air Bars
About 5-11
Alignment
Crossfold 7-25
Primary Fold 7-24
Air Cylinders
About 5-11
Air Flow Adjustment
Primary Fold Ski 7-26
Stacker Door 7-27
Air Filter/Auto Drain
Clean 4-14
Air Filter/Regulators 5-10
Air Pressure Switch 5-10
Air Reservoirs 5-10
Air Valves/Air Valve Solenoids 5-11
Air Valve Repair 7-28
Troubleshooting 6-19
Controls, Operating.
See
Operating Controls
Controls and Indicators, CHI•Touch Screen 3-6,
C-3
Control System, Electrical 5-6
CHI•Touch Screen 5-6
Communications and the I/O Panel 5-6
I/O Control Panel 5-7
Microprocessor 5-6
Photosensors 5-8
Proximity Sensors 5-8
Crossfold
Air Bar Alignment 7-25
Jam Detection, CHI•Touch C-7
Operation Checkout 2-15
Phase, Sequence of Operation 5-17
Ribbon Tension Adjustment
First 7-6
Second 7-8
Transfer 7-7
Tracking Tape Replacement, Drive and Idler Roll
7-14
D
Daily Operating Procedures 3-7
Fold Operation 3-9
Handling Jams and Misfeeds Safely 3-9
Interconnected Stop Circuit (option) Operation
Notes 3-12
Shut-Down 3-12
Start-Up 3-7
Daily Operation Safety 1-3
Daily PM (8 Hours) 4-2
Check and Clean Photosensors 4-3
Check Safety Equipment 4-3
General Cleanliness 4-2
Watch and Listen for Anything Abnormal 4-2
Disconnect Switch and Fuses 5-3
Drive Belt, Stacker
Condition and Tension Check 4-5
Tension Adjustment 7-19
Drive Chain
Clean and Lubricate 4-11
Tension Adjustment
Main 7-17
Second Crossfold Ribbon 7-18
E
Electrical
Checkout, Ribbon Rotation 2-11
Check Connections 4-16
Check Insulation Resistance to Earth Ground 4-
16
Connection 2-6
Electrical Panel 5-4
Electrical System
About 5-2
Control System 5-6
CHI•Touch Screen 5-6
Communications and the I/O Panel 5-6
I/O Control Panel 5-7
Microprocessor 5-6
Photosensors 5-8
Proximity Sensors 5-8
Power System 5-2
Disconnect Switch and Fuses 5-3
Electrical Panel 5-4
Step-Down Transformers 5-3
Troubleshooting 6-6
Endframe Controls.
See
Operating Controls
TOC INDEX