NH-3100
UHF Handheld Microphone
Parts and functions
Battery installation & indicator
●
►
○
●
When the microphone is switched ON, the
power indicator
②
will blink once to denote
the batteries are in good condition.
If the indicator remains illuminated, it means
the batteries are weak and require
replacement.
IMPORTANT !
Batteries contain
corrosive acid that may leak and
damage the microphone when
stored for a long period. Batteries
should be removed from the
microphone before storing without
use for more than 4 weeks.
This microphone requires two
AA batteries to operate.
To install, remove the battery
cover and insert the batteries
into the compartment.
Channel synchronizing of the receiver and microphone
Changing the microphone
’s channel
Press the synchronizing button of the receiver and the receiver
will transmit the frequency to the microphone and synchronize the
channels
If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each
other, devices are within 10~30cm of each other, and try again.
2 3
4
1
5
6
IR
RF AF
SYNC
CHIAYO ELECTRONICS CO.,LTD.
Http://www.chiayo.com.tw
｜
Email: [email protected]
Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan
Tel: 886-2-27415741
｜
Fax: 886-2-27525242
Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan
Tel: 886-5-2711000
｜
Fax: 886-5-5767611
1.
Cartridge
2.
Battery power LED
3.
Power switch
4.
Battery compartment
5.
Color cap
6.
IR sensor area
To achieve successful
synchronization hold the
receiver and microphone
within 10-30cm of each
other.
