LOCATION AND FUNCTION OF PARTS OF RECEIVER
(VRA-200/VRA-220)
OPERATING THE SYSTEM
First, please plugged adaptor in nearby home outlet, then connect the DC plug of
adaptor to your receiver.
Connect the receiver to karaoke amplifier and speaker e.t.c
<Refer to
CONNECTIONS
>
Turn on both receiver and amplifier.
Slide the power switch on microphone to on position. Then the channel indicator of
receiver will light up.
Adjust the volume control of amplifier to comfortable magnitude.
Find the best position with a wide view of the room then setting the receiver.
4
VRA-200 FRONT PANEL
REAR PANEL
1
HANDHELD MIC CHARGER HOLDER(HC-20)
NOTE: Be sure to use specified battery only. You can not charge other type of
battery. Do not use any battery and battery charger other than specified.
1.Connect the Adapter to a wall outlet.
2.Insert infrared Wireless Microphone
to charger.
3.The red LED of charger will light up
during charging. Charging time will
be approx. 3.5 hours.
4.When charging is completed, the green
LED indicator will turn on and red LED
turn off.
5.Rechargeable battery to be exactly
same type as attached only. When
other type of battery is installed in
microphone, you can not charger
the battery.
BATTERY CHARGER CHARGING THE BATTERY (HC-10)
Operation:
1.connect the DC plug of the adapter to the DC
socket of the charger.
2.When charging , the indication lamp is (Red).
3.Press each charge/discharge button for
discharge (yellow)and press one more time
that will be back to charging (Red).
4.When full charge , (Green) and sounded .
5.When connect the charging plug to the ring
output socket of the charger, the right
charger's trough could be an external charge.
6.The full charge capacity is 700mAH.
7.It can be charged with 4 x2100mA/1.2V or
2 x2100mA/2.4V.
VRA-220 FRONT PANEL
2100mA/1.2V
2100mA/2.4V
DC IN
DC IN
12-15V
12-15V
MAIN SPEAKER OUT
MAIN SPEAKER OUT
R
R
R
R
L
L
L
L
IN
IN
OUT
OUT
AUX IN
AUX IN
LINE
LINE
EXTERNAL SENSOR IN
EXTERNAL SENSOR IN
1. POWER ON / OFF
2. IR1 / IR2 INDICATOR
3. AF SIGNAL INDICATOR
4. LINE VOLUME CONTROL
5. AUX IN PUT R/L VOLUME CONTROL
6. TONE BASS CONTROL
7. TONE TREBLE CONTROL
8. IR1 / IR2 VOLUME CONTROL
9. SENSOR IN( TO SENSOR IN PUT )
10. AUX IN PUT
11. LINE IN PUT R/L
12. LINE OUT PUT
13. SPEAKER OUT x2( TO LOAD SPEAKER<8 > )
14. DC IN PUT (12~15 VDC / 3A )
15.EXTEMAL SENSORE
16.LOAD SPEAKER
15
15
99
16
16
13
13
10
10
13
13
14
14
11
11
12
12
15
15
99
11
88
66
77
22
44
55
33
16
16
CHARGE LCD
ADAPTOR
CHARGING BATTERY
DISCHARGING LCD