1
DB-2400
Digital Belt-pack Transmitter
Parts and functions
1
Antenna
2
LCD
3
Menu button
4
Setting button
5
High-impedance gain
control (GT)
6
Low-impedance gain
control (MT)
7
Channel sync button
8
Battery compartment
9
Cover release button
10
Power switch
11
Battery power LED
12
Audio input connector
13
Charging contacts
Battery installation & indicator
●
►
○
●
When the transmitter is switched ON, the
battery power LED (red) will blink once to
denote the batteries installed are in good
condition
If the LED remains illuminated the batteries
have expired and require replacement.
This transmitter requires two
AA batteries to operate.
To install, open the battery cover
and insert the batteries into the
battery compartment.
IMPORTANT:
Batteries contain corrosive acid that may leak and damage the transmitter when stored for a
long period. Batteries should be removed from the transmitter before storing without use for more than 4
weeks.
Changing CHANNEL / FREQUENCY
1
Press-release
MENU
button until the
CHANNEL-FREQUENCY page appears.
2
Press and hold
SET
button until the
channel number flashes to denote
readiness for setting.
3
Press-release
SET
(UP) or
MENU
(DOWN)
button to select a new channel.
4
After a channel is chosen, wait about 3
seconds to store the setting.
MHz
C H : 0 7 9
2 4 8 0
MHz
C H : 0 7 9
2 4 8 0
MHz
C H : 0 7 6
2 4 7 7
11
12
13
10
1
2
3
4
5 6
8
7
9
