Attendant
Control Panel (ACP)
Operation
The ACP is located at the foot end of the bed.
RELEASE KEY:
Simultaneously press and hold the Release Key button (lef or right
button) and one of the function button needed among Backrest, Thigh
Section, Auto-Contour, Mattress Platform Height, Trendelenburg and
Reverse Trendelenburg.
(CPR, Trendelenburg and Auto-Chair push button work without the
Release Key. Just press them directly).
BACKREST
:
these buttons raise and lower the backrest (lower button to raise, upper
button to lower).
The backrest reaches an angle approximately 50° above the horizontal.
(62° if supplied with electrically operated retracting backrest).
THIGH SECTION
:
These buttons raise and lower the thigh section (lower button to raise,
upper button to lower).
When the thigh section is raised from the flat position (32°), the calf
section will be in the Fowler position (7° angled downwards).
AUTO-CONTOUR:
The Auto-Contour up button simultaneously raises the backrest and thigh
sections to provide upright patient profiling (lower button to raise, upper
button to lower); the raised thigh section prevents the patient sliding
down the bed.
The Auto-Contour down button returns the mattress platform to a flat
position.
MATTRESS PLATFORM HEIGHT
:
these buttons raise and lower the mattress platform (lower button to
raise, upper button to lower).
Highest position: 39cm (43cm if supplied with integrated scale).
Lowest position: 75cm (79cm if supplied with integrated scale).
IFU-120765-SLB-RD-Chiappa-Arredamenti-11/2017#ed04
40
