Chevrolet TRAX Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
11354406) - 2018 - crc - 5/18/17
Instruments and Controls
125
Information Displays
Driver Information
Center (DIC)
The DIC displays information about
the vehicle. It also displays warning
messages if a system problem is
detected. All messages appear in
the DIC display in the instrument
cluster.
DIC Operation and Displays
On some models, the trip odometer
reset stem is used to operate the
DIC. On other models, the controls
for the DIC are on the turn signal
lever.
DIC Buttons
1.
SET/CLR:
Press to set or clear
the menu item displayed.
2.
w
/
x
:
Turn the band to
scroll through the menus.
3.
MENU:
Press to display the
Trip/Fuel menu and the Vehicle
Information menu. This button
is also used to return to or exit
the last screen displayed on
the DIC.
Vehicle Information Menu
Items (Base Level DIC)
Press MENU to view the DIC menu.
Some items display in the upper
display area, some in the lower
display area, and others use both
the upper and lower display areas.
Use
w
/
x
to scroll through the
menu items. Not all items are
available on every vehicle. The
following is a list of possible menu
items:
.
Remaining Oil Life
.
Units
.
Tire Learn
Remaining Oil Life
This menu is not available while the
vehicle is moving. This display
shows an estimate of the oil's
remaining useful life. If 99
:
% is
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low,
the
:
% CHANGE message will
appear on the display. The oil
should changed as soon as
possible. See
. In
addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended. See
Remember, the Oil Life display must
be reset after each oil change. It will
not reset itself. Also, be careful not
to reset the Oil Life display
accidentally at any time other than
when the oil has just been changed.
It cannot be reset accurately until
the next oil change. To reset the
engine oil life system, press SET/
CLR while the Oil Life display is
active. See
.