Chevrolet Trailblazer Owner Manual (GMNA-Localizing-U.S./Canada-
16263960) - 2023 - CRC - 2/23/22
Keys, Doors, and Windows
35
Pull the sun visor down to block glare.
Detach the sun visor from the center mount
to pivot to the side window and,
if equipped, extend along the rod.
Roof
Sunroof
If equipped, the ignition must be on or in
ACC/ACCESSORY, or Retained Accessory
Power (RAP) must be active to operate the
sunroof. See
Ignition Positions (Key Access)
or
Ignition Positions (Keyless Access)
and
Retained Accessory Power (RAP)
< Type1 >
1. Sunroof Switch (SLIDE)
2. Vent Switch (TILT)
Sunroof Switch
Express-Open/Express-Close :
To
express-open the sunroof, fully press and
release
i
(1). Press the switch again to
stop it. To express-close the sunroof, fully
press and release
g
(1). Press the switch
again to stop it.
Open/Close (Manual Mode) :
To open the
sunroof, press to the first position, and
hold
i
(1) until the sunroof reaches the
desired position. Press and hold
g
(1) to
close it.
Sunshade Switch
Express-Open/Express-Close :
To
express-open the sunshade, fully press and
release
r
. To express-close the sunshade,
fully press and release
s
. Press the switch
again to stop it.
Open/Close (Manual Mode) :
To open the
sunshade, press to the first position, and
hold
r
until the sunshade reaches the
desired position.
Press and hold
s
to close the sunshade.
When the sunroof is opened, an air deflector
will automatically raise.
The air deflector will retract when the
sunroof is closed.
Automatic Reversal System
The sunroof has an automatic reversal
system that is only active when the sunroof
is operated in express-close mode.
If an object is in the path while express
closing, the reversal system will detect an
object, stop, and open the sunroof or power
sunshade slightly.
If frost or other conditions prevent closing,
override the feature by closing the sunroof
in manual mode. To stop movement, release
the switch.
In the event of closing difficulties like frost
or other conditions, it is possible to override
the reversal system. To override the reversal
system, close in manual mode. To stop the
movement, release the switch.
