Chevrolet Trailblazer Owner Manual (GMNA-Localizing-SE Asia/CenAmer/
Carib-13517615) - 2020 - CRC - 3/22/19
Driving and Operating
209
the clutch pedal. If four-wheel low
setting is selected when the vehicle
is in gear and/or moving faster than
5 km/h, the four-wheel low indicator
light will flash for 30 seconds but will
not complete the shift and the light
will go back to the original setting.
Shifting from Four-Wheel Low
to Two-Wheel High or
Four-Wheel High (4
n
to 2
m
or 4
m
)
To shift from four-wheel low
4
n
to
two-wheel high
2
m
or four-wheel
high
4
m
, the vehicle must be
stopped or moving less than 5 km/h
with the transmission in N (Neutral).
The preferred method for shifting
out of four-wheel low
4
n
is to have
your vehicle moving 1.6 to 3.2 km/h.
Rotate the shift control switch to the
two-wheel high
2
m
or four-wheel
high
4
m
position. You must wait for
the two-wheel high or four-wheel
high indicator light to stop flashing
and stay on before shifting the
transmission into gear or releasing
the clutch pedal. If two-wheel high
or four-wheel high setting is
selected when the vehicle is in gear
and/or moving faster than 5 km/h,
the two-wheel high or four-wheel
high indicator light will flash for
30 seconds but will not complete the
shift and the light will go back to the
original setting.
Shifting to Neutral (2
m
, 4
m
or 4
n
to Neutral)
Use N (Neutral) when you plan to
tow the vehicle. See
for towing
instructions. The vehicle must be
stopped. To shift the transfer case
into N (Neutral) with the key on
position
ON
, do the following:
1. Set the parking brake.
2. Press the brake pedal and shift
the transmission in N (Neutral).
3. Shift the transfer case to
two-wheel high
2
m
.
4. Rotate the shift control switch
clockwise past four-wheel low
4
n
to N (Neutral). Hold the
switch in the N (Neutral) setting
for at least 20 seconds or wait
until the red Neutral indicator
light stops flashing and stays
on. The N (Neutral) red
indicator light will come on
when the transfer case shift to
N (Neutral) is complete.
Note
Upon releasing the shift control
switch from N (Neutral) setting, the
switch will rotate to the four-wheel
low (
4
n
) setting. The transfer case
will remain in N with red N (Neutral)
indicator light illuminated until a new
setting is selected.
5. Press and hold the brake pedal
and shift the transmission to
R (Reverse) for 1 second, then
shift the transmission to D
(Drive) for 1 second to insure
the transfer case is in
N (Neutral). If the transfer case
is not in N (Neutral), repeat this
procedure starting at Step 3.
6. Place the transmission selector
lever in P (Park).
7. Turn the ignition to LOCK/OFF.
