Chevrolet Suburban 2012 Owner'S Manual Download Page 95

Page: 95 / 544

Black plate (33,1)

Chevrolet Tahoe/Suburban Owner Manual - 2012 - 2nd - 11/9/11

Seats and Restraints

3-33

The right front passenger frontal
airbag is in the instrument panel on
the passenger's side.

Driver Side Shown, Passenger

Side Similar

If the vehicle has seat

‐

mounted side

impact airbags for the driver and
right front passenger, they are in the
side of the seatbacks closest to
the door.

Driver Side Shown, Passenger

Side Similar

The roof-rail airbags for the driver,
right front passenger, and second
row outboard passengers are in the
ceiling above the side windows.

Summary of Contents for Suburban 2012

































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Suburban 2012

Reviews:

Brands by name

Popular brands

Chevrolet Suburban 2012, Owner'S Manual

Search results

Summary of Contents for Suburban 2012

Reviews:

Brands by name

Popular brands