Chevrolet sonic 2016, Owner'S Manual, Page: 157 / 353

Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) -
2016 - CRC - 5/27/15
156 Infotainment System
2. Say “ Dial ” or “ Call. ”
3. Say the entire number without
pausing or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Calling 911 Emergency Number
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Dial ” or “ Call. ”
3. Say “ 911. ”
4. Say “ Dial ” or “ Call. ”
Using the “ Digit Dial ” Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“ Clear ” at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“ Verify ” at any time.
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. Say “ Digit Dial. ”
3. Say each digit, one at a time,
that you want to dial. After
each digit is entered, the
system repeats back the digit it
heard followed by a tone. After
the last digit has been entered,
say
“ Dial. ”
Once connected, the person called
will be heard through the audio
speakers.
Using the “ Re-dial ” Command
1. Press
b
/
g
. The system
responds “ Ready, ” followed by
a tone.
2. After the tone, say “ Re-dial. ”
The system dials the last
number called from the
connected cell phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press
b
/
g
to answer the call.
.
Press
$
/
i
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press
b
/
g
to answer an
incoming call when another call
is active. The original call is
placed on hold.
.
Press
b
/
g
again to return to
the original call.
.
To ignore the incoming call, no
action is required.
.
Press
$
/
i
to disconnect the
current call and switch to the call
on hold.