Home
/
Chevrolet
/
sonic 2016
/
Owner'S Manual

Chevrolet sonic 2016, Owner'S Manual, Page: 121 / 353

Share

Page: 121 / 353

Chevrolet sonic 2016 Owner'S Manual Download Page 121

Chevrolet Sonic Owner Manual (GMNA-Localizing-U.S/Canada-9085902) -

2016 - CRC - 5/27/15

120

Lighting

Lighting

Exterior Lighting

Exterior Lamp Controls . . . . . . . 120
Headlamp High/Low-Beam

Changer . . . . . . . . . . . . . . . . . . . . 121

Flash-to-Pass . . . . . . . . . . . . . . . . 121
Daytime Running

Lamps (DRL) . . . . . . . . . . . . . . . 121

Automatic Headlamp

System . . . . . . . . . . . . . . . . . . . . . . 122

Hazard Warning Flashers . . . . . 122
Turn and Lane-Change

Signals . . . . . . . . . . . . . . . . . . . . . . 123

Fog Lamps . . . . . . . . . . . . . . . . . . . 123

Interior Lighting

Instrument Panel Illumination

Control . . . . . . . . . . . . . . . . . . . . . . 124

Courtesy Lamps . . . . . . . . . . . . . . 124
Dome Lamps . . . . . . . . . . . . . . . . . 124
Reading Lamps . . . . . . . . . . . . . . 124

Lighting Features

Entry Lighting . . . . . . . . . . . . . . . . 125
Exit Lighting . . . . . . . . . . . . . . . . . . 125
Battery Load Management . . . 125
Battery Power Protection . . . . . 126
Exterior Lighting Battery

Saver . . . . . . . . . . . . . . . . . . . . . . . 126

Exterior Lighting

Exterior Lamp Controls

The exterior lamp control is on the
instrument panel to the outboard
side of the steering column.

There are four positions:

O

(Off) :

Briefly turn to this position

to turn the automatic light control off
or on again.

AUTO (Automatic) :

Turns the

headlamps on automatically at
normal brightness, together with the
following:

.

Parking Lamps

.

Taillamps

.

License Plate Lamps

.

Instrument Panel Lights

.

Sidemarker Lamps

;

(Parking Lamps) :

Turns on the

parking lamps including all lamps
except the headlamps.

5

(Headlamps) :

Turns the

headlamps on together with the
parking lamps and instrument panel
lights. A warning chime sounds if
the driver door is opened when the
ignition switch is off and the
headlamps are on.

#

(Front Fog Lamps) :

If equipped

with fog lamps, press to turn the
lamps on or off.

See

Fog Lamps

0

123

.

When the lights are on,

;

will be

lit. See

Lamps On Reminder

0

108

.

«
...
119
120
121
122
123
...
»

Summary of Contents for sonic 2016


































































































































































































































































































































































Reviews:

No comments