Chevrolet Sail Hatchback Petrol, Owner'S Manual, Page: 42 / 212

Securing a Child Restraint By
Using ISOFIX*
To secure a child restraint:
1. Locate the anchors where the
seatback meets the back of the seat
cushion.
The location of each lower anchor is
identified by a circular mark on the
lower edge of the rear seatback.
HEX0043
2. Clear all items off the seat. Move
safety belts and safety belt buckles
away from the lower anchors so
they do not interfere with proper
latching.
3. Place the child restraint on the seat.
4. Attach the anchor points on the
child restraint to the anchors in the
vehicle. Follow the instructions that
come with the restraint.
5. To attach the top strap to the top
strap anchor -
Consult the manufacturer's instru-
ctions to determine when and how
to tighten the top strap. The top
strap anchor brackets are located at
the joint between the left and right
rear seatbacks on the rear compart-
ment floor. Floor mat have a notch
above itself, you can open the floor
mat from the notch to use.
6. Push and pull the child restraint in
different directions to make sure it
is secure.
7. Make sure the child restraint is not
too hot before placing a child there.
If you have been in a severe collision
the anchoring system may have been
damaged. Some parts may need to be
repaired or replaced.
Have the anchoring system inspected
after a collision.
Warning
Children who are up against, or very
close to, any airbag when it inflates
can be seriously injured or killed.
Never put a rear-facing child restraint
in the front passenger seat. Secure a
rear-facing child restraint in a rear
seat. It is also better to secure a
forward-facing child restraint in a rear
seat.
HEX0044
38 Seats and Restraints