Chevrolet Orlando 2012 Owner'S Manual Download Page 20

Page: 20 / 378

Black plate (14,1)

Chevrolet Orlando Owner Manual - 2012

1-14

In Brief

Vehicles with Air Conditioning

A. Temperature Control

B. Bi-level Air Mode

C. Floor Air Mode

D. Vent Air Mode

E. Fan Control

Driver and Passenger Heated
Seats (If Equipped)

G. Rear Window Defogger

H. Recirculation

Defog

Air Conditioning

K. Defrost

Automatic Climate Control System

A. Temperature Control

B. Rear Window Defogger

C. AUTO (Automatic Operation)

D. Defrost

E. Fan Control

Driver and Passenger Heated
Seats (If Equipped)

G. Power

H. Recirculation

MODE (Air Delivery Mode)

AQS (Air Quality Sensor)

K. Air Conditioning

See

Climate Control Systems on

page 8

‑

Automatic Climate

Control System on page 8

‑

(If Equipped).

Transmission

Driver Shift Control (DSC)

Driver Shift Control (DSC) allows
you to shift an automatic
transmission similar to a manual
transmission. To use the DSC
feature:

1. Move the shift lever from

D (Drive) to the left into the (+) or
(

−

) manual position.

2. Press the shift lever forward (+)

to upshift or rearward (

−

) to

downshift. An M and the current
gear will be displayed in the
Driver Information Center (DIC).

Summary of Contents for Orlando 2012



























































































































































































































































































































































































Search results

Summary of Contents for Orlando 2012

Reviews:

Brands by name

Popular brands

Chevrolet Orlando 2012, Owner'S Manual

Search results

Summary of Contents for Orlando 2012

Reviews:

Brands by name

Popular brands