Chevrolet Malibu Hybrid 2008 Owner'S Manual Download Page 13 | Manualshive

Page: 13 / 370

background image

To lower the rear seatback, pull up on the seatback
strap while folding the seatback down. This allows
access to the trunk.

To raise the rear seatback pull the seatback up and
make sure it latches. Push and pull on the seatback to
be sure it is locked in position. Make sure that the
safety belts are properly stowed over the seatback in
all three positions.

{

CAUTION:

A safety belt that is improperly routed, not
properly attached, or twisted will not provide
the protection needed in a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that the safety belts are properly
routed and attached, and are not twisted.

{

CAUTION:

If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it is
locked.

When the seat is not in use, it should be kept in the
upright locked position.

1-9

«
...
11
12
13
14
15
...
»

Summary of Contents for Malibu Hybrid 2008



















































































































































































































































































































































































Reviews:

No comments

Related manuals for Malibu Hybrid 2008

Brand: Wallbox Pages: 7

Brand: Uebler Pages: 18

Cherokee 16 1982

Brand: Jeep Pages: 1311

Brand: Vintage Air Pages: 28

Automotive 31006

Brand: KRAFTWERK Pages: 2

Brand: Inbay Pages: 20

Brand: Westfalia Pages: 10

Brand: Yakima Pages: 15

Multi Vehicle Mount MVM-35-05

Brand: Bracketron Pages: 4

OVER DRIVE PolyPRO 3 Car Cover

Brand: Classic Accessories Pages: 2

Brand: Navman Pages: 27

Brand: AEV Pages: 16

DELTA HF integrale

Brand: Lancia Pages: 101

Brand: Volvo Pages: 275

Brand: Mercedes-Benz Pages: 108

Brand: J Communications Pages: 10

ECHOMASTER PRO ParkAlert PS-TRUCK30

Brand: AAMP Global Pages: 12

Brand: Porsche Pages: 347

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands