The cruise control
buttons are located
on the steering wheel.
I
(On/Off):
Press to turn the cruise control system
on and off.
RES+ (Resume):
Press to resume a set speed and to
accelerate the speed.
SET
−
(Set):
Press to set a speed and to decrease
the speed.
To set a speed do the following:
1. Press
I
to turn cruise control on. The indicator
light on the button comes on.
2. Get up to the desired speed.
3. Press the SET
−
and release it. The cruise symbol
displays in the instrument panel cluster to show the
system is engaged.
4. Take your foot off the accelerator pedal.
When the brakes are applied, the cruise control shuts off.
If the vehicle is in cruise control and the Traction
Control System (TCS) or Enhanced Traction System
(ETS) begins to limit wheel spin, the cruise control
automatically disengages. See
(TCS) on page 4-5
and
(ESC) on page 4-7
. When road conditions allow, the
cruise control can be used again.
Resuming a Set Speed
Suppose the cruise control is set at a desired speed
and then the brakes are applied. This disengages
the cruise control. The cruise symbol in the instrument
panel cluster also goes out indicating cruise is no
longer engaged. To return to the previously set speed,
you do not need to repeat the set process again.
Once at a speed of about 25 mph (40 km/h) or more,
you can briefly press the RES+.
This takes the vehicle back up to the previously chosen
speed and stays there.
3-11
Summary of Contents for Malibu Hybrid 2008
