Chevrolet Impala Police 2012, Manual

Page: 9 / 62

Black plate (3,1)
Chevrolet Impala Police Package - 2012
Seats and Restraints 3-3
Two front impact sensors are
installed in GM vehicles. Do not
relocate of disconnect the front
sensors. The location and
orientation of the front sensors
are critical for correct operation
of the airbag system. Avoid
mounting components on or
near the sensors. Push bumper
styles with vertical pushing
members that are in fore-aft
alignment with the front airbag
sensors are not recommended. Q: Is there anything I might add
to the front or sides of the
vehicle that could keep the
airbags from working
properly?
A: Yes. If you add things that
change your vehicle's frame,
bumper system, height, front end
or side sheet metal, they may
keep the airbag system from
working properly. Also, the
airbag system may not work
properly if you relocate any of
the airbag sensors. If you have
any questions about this, you
should contact Customer
Assistance before you modify
your vehicle. The phone
numbers and addresses for
Customer Assistance are in
Step Two of the Customer
Satisfaction Procedures in the
owner manual. See
“ Customer
Satisfaction Procedure ” in the
owner manual Index.
The service manual has information
about the location of the airbag
sensors, sensing and diagnostic
module, and airbag wiring.
See
“ Service Publications
Ordering Information ” in the
owner manual.