Chevrolet Impala 2018 Owner'S Manual Download | Manualshive

Page: 178 / 342

background image

Chevrolet Impala Owner Manual (GMNA-Localizing-U.S./Canada-11348316) -

2018 - crc - 3/29/17

Driving and Operating

177

The transmission will only allow you
to shift into gears appropriate for the
vehicle speed and engine
revolutions per minute (rpm):

.

The transmission will not allow
shifting to the next higher gear if
the vehicle speed or engine rpm
is too low.

.

The transmission will not allow
shifting to the next lower gear if
the vehicle speed or engine rpm
is too high.

Second Gear Start Feature

When accelerating the vehicle from
a stop in snowy and icy conditions,
you may want to shift into
2 (Second) gear. A higher gear
allows you to gain more traction on
slippery surfaces.

With the DSC feature, the vehicle
can be set to pull away in
2 (Second) gear.

1. Move the shift lever from

D (Drive) to M (Manual Mode).

2. With the vehicle stopped, press

the + (plus) end of the button to
select 2 (Second) gear. The
vehicle will start from a stop
position in 2 (Second) gear.

3. Once moving, select the

desired drive gear.

Brakes

Antilock Brake
System (ABS)

This vehicle has an Antilock Brake
System (ABS), an advanced
electronic braking system that helps
prevent a braking skid.

When the vehicle begins to drive
away, ABS checks itself.
A momentary motor or clicking noise
may be heard while this test is going
on, and it may even be noticed that
the brake pedal moves a little. This
is normal.

If there is a problem with ABS, this
warning light stays on. See

Brake System (ABS) Warning Light

.

«
...
176
177
178
179
180
...
»

Summary of Contents for Impala 2018























































































































































































































































































































































Reviews:

No comments

Related manuals for Impala 2018

Brand: Landoll Pages: 80

700 Diesel ATV 2007

Brand: Arctic Cat Pages: 184

Sportsman 9921792

Brand: Polaris Pages: 131

Brand: Honda Pages: 232

Brand: Lil Pick Up Pages: 29

Brand: Ski-Doo Pages: 52

Brand: HYOSUNG Pages: 48

Brand: Bluewheel Pages: 50

Powermover PM5900

Brand: Ultra-Fab Pages: 18

Brand: Dometic Pages: 96

Brand: PRONAR Pages: 131

Brand: Range Road Pages: 5

Brand: Panther Pages: 10

Brand: Yamaha Pages: 52

Brand: Yamaha Pages: 174

E-Z-GO Cushman TITAN 36V HD

Brand: Textron Pages: 60

Brand: Thumpstar Pages: 182

Brand: SMC Networks Pages: 93

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands