Chevrolet City Express Owner Manual (GMNA-Localizing-U.S./Canada-
11683523) - 2018 - CRC - 7/10/17
Keys, Doors, and Windows
31
2. Close all the doors and lock
the vehicle in one of
three ways:
.
Use the key.
.
With the door open, press
the inside lock button and
close the door. Make sure
the key is not inside the
vehicle.
.
Use the RKE transmitter.
See
.
If the lock button is pressed
when the doors are locked,
the lights flash twice and
the horn may beep once to
indicate the doors are
locked.
3. Confirm that the security light
comes on. The security light
stays on for about 30 seconds.
The vehicle security system is
now pre-armed.
After 30 seconds the alarm system
will arm, and the security light will
begin to slowly flash indicating the
alarm system is operating.
The system will not arm if any of the
following occur during the
30-second pre-arm time period:
.
The door is unlocked with the
key, the power door lock switch,
or the RKE transmitter.
.
Any door is open.
.
The ignition key is turned to
ACC or ON.
.
The key is turned slowly when
locking the door.
If the key is turned beyond the
vertical position toward the unlock
position to remove the key, the
system may be disarmed when the
key is removed. If the security light
fails to glow for a period of time,
unlock the door once and lock it
again.
When the driver and/or passengers
are in the vehicle, the system will
still arm when all doors are closed
and locked and the ignition key is in
the OFF position.
Vehicle Security System
Activation
The security system will activate as
follows:
.
The headlamps blink and the
horn sounds intermittently. The
alarm automatically turns off
after a period of time. The alarm
will sound if the vehicle is
tampered with again.
.
The alarm will sound if opening
a door without using the key or
RKE transmitter, even if the door
is unlocked by using the inside
lock knob or the power door lock
switch.
