Chevrolet Beat, Manual

Page: 85 / 212

AUDIO PLAYERS
CD Player
As the CD is inserted, the radio will
appear on the display and as the CD is
loading, file check will appear on the
display.
Once playback begins, the track and
track number will appear on the display.
If the ignition or radio is turned off with
a CD in the player, it will stay in the
player. When the ignition and radio are
turned on, the CD will start playing
where it stopped, if it was the last
selected audio source.
If playing a CD-R, the sound quality
may be reduced due to CD-R quality,
the method of recording, the quality of
the music that has been recorded, and
the way the CD-R has been handled.
There may be an increase in skipping,
difficulty in finding tracks, and/or
difficulty in loading and ejecting. If
these problems occur, check the bottom
surface of the CD. If the surface of the
CD is damaged, such as cracked,
broken, or scratched, the CD will not
play properly.
81 Infotainment System
If there is no apparent damage, try a
known good CD.
Do not add any label to a CD, it could
get caught in the CD player. If a CD is
recorded on a personal computer and a
description label is needed, try labeling
the top of the recorded CD with a
marking pen instead.
If you add any label to a CD, insert
more than one CD into the slot at a
time, or attempt to play scratched or
damaged CD’s, you could damage
the CD player. When using the CD
player, use only CD’s in good
condition without any label, load one
CD at a time, and keep the CD player
and the loading slot free of foreign
materials, liquids, and debris.
Caution
Disc Insert
Insert a CD into a CD slot with CD label
up.
CD Playback Mode Selection
Insert a CD into CD deck, then the CD
goes to the playback mode.
CD EJECT
Press the [EJECT], then the disc will be
ejected from the radio.
Pull the disc out of the radio.