Chevrolet Beat, Manual

Page: 119 / 212

BULB REPLACEMENT
Switch off the ignition and switch off
the relevant switch or close the doors.
Only hold a new bulb at the base! Do
not touch the bulb glass with bare
hands.
Use only the same bulb type for
replacement.
Replace headlamp bulbs from within
the engine compartment.
Note
After driving in heavy rain or
washing, some exterior lamp lenses
could appear frosty.
This condition is caused by the
temperature difference between the
lamp inside and outside.
This is similar to the condensation
on your windows inside your
vehicle during the rain and doesn't
indicate a problem with your
vehicle.
If the water leaks into the lamp bulb
circuitry, have the vehicle checked
by your CHEVROLET retailer.
Headlamp And Parking Lamps
Low beam and high beam
1. Detach plug connector from bulb.
2. Remove protective cover.
3. Press spring clip, disengage it.
115 Vehicle Care
Warning
The same rating of the bulb to be used
during replacement and any usage of
higher wattage bulbs can cause
thermal issues such as melting of
lamp housing and its surrounding
parts. Warranty would be void if
higher wattage bulbs are being used.