Chevrolet Avalanche 2005 Owner'S Manual Download Page 424

Page: 424 / 494

4. Repeat this procedure at least two times. If the

spare tire lowers to the ground, continue with
Step 5 of Removing the Spare Tire and Tools on
page 5-79.

5. Turn the wrench counterclockwise until

approximately 6 inches (15 cm) of cable is exposed.

6. Stand the wheel blocks on their shortest ends, with

the backs facing each other.

7. Place the bottom edge

of the jack (A) on the
wheel blocks (B),
separating them so
that the jack is
balanced securely.

8. Attach the jack handle, extension, and wheel

wrench to the jack and place it (with the wheel
blocks) under the vehicle towards the front of the
rear bumper.

5-90

Summary of Contents for Avalanche 2005















































































































































































































































































































































































































































































































Search results

Summary of Contents for Avalanche 2005

Reviews:

Related manuals for Avalanche 2005

Brands by name

Popular brands

Chevrolet Avalanche 2005, Owner'S Manual

Search results

Summary of Contents for Avalanche 2005

Reviews:

Related manuals for Avalanche 2005

Brands by name

Popular brands