Chevrolet Avalanche 2005 Owner'S Manual Download Page 388

Page: 388 / 494

A. Low-Beam Headlamp
B. High-Beam Headlamp

5. Turn the bulb connector counterclockwise and pull it

out of the housing.

6. Unplug the electrical connector from the old bulb.
7. Plug in the electrical connector to the new bulb. Use

care not to touch the new bulb with your bare
hands or anything damp or oily.

8. Place the connector with the new bulb into the

headlamp housing and turn it clockwise until it is
tight.

9. Put the headlamp assembly back into the vehicle

and reinstall the two pins.

10. Place the inboard end of the turn signal/parking

lamp housing into the pocket.

11. Push the outboard side of the housing in until the

release clip snaps into place.

Vehicles without Body-Side Cladding

1. Remove the pin on the headlamp assembly by

turning the pin up and pulling it straight out.

2. Pull the headlamp assembly out.

5-54

Summary of Contents for Avalanche 2005















































































































































































































































































































































































































































































































Search results

Summary of Contents for Avalanche 2005

Reviews:

Related manuals for Avalanche 2005

Brands by name

Popular brands

Chevrolet Avalanche 2005, Owner'S Manual

Search results

Summary of Contents for Avalanche 2005

Reviews:

Related manuals for Avalanche 2005

Brands by name

Popular brands