Black plate (30,1)
Chevrolet Captiva Sport Owner Manual (GMNA-Localizing-U.S./Mexico-
6014141) - 2014 - crc - 8/13/13
7-30
Infotainment System
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
J
/
0
to link all callers
together.
Ending a Call
Press
K
to end a call.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
.
To mute a call, press
J
/
0
, and
then say
“
Mute call.
”
.
To cancel mute, press
J
/
0
,
and then say
“
Un-mute call.
”
Transferring a Call
Audio can be transferred between
the Bluetooth system and the cell
phone.
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after the
ignition is turned to ON/RUN.
Transferring Audio from the
Bluetooth System to a Cell Phone
During a call with the audio in the
vehicle:
1. Press
J
/
0
.
2. Say
“
Transfer Call.
”
Transferring Audio to the
Bluetooth System from a Cell
Phone
During a call with the audio on the
cell phone, press
J
/
0
. The audio
transfers to the vehicle. If the audio
does not transfer to the vehicle, use
the audio transfer feature on the cell
phone. See your cell phone
manufacturer's user guide for more
information.
Voice Pass-Thru
Voice pass-thru allows access to the
voice recognition commands on the
cell phone. See your cell phone
manufacturer's user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press and hold
J
/
0
for
two seconds.
2. Say
“
Bluetooth.
”
This command
can be skipped.
3. Say
“
Voice.
”
The system
responds
“
OK, accessing
<phone name>.
”
The cell phone's normal prompt
messages will go through their cycle
according to the phone's operating
instructions.
