Black plate (37,1)
Chevrolet Captiva Sport Owner Manual (GMNA-Localizing-U.S./Mexico-
6014141) - 2014 - crc - 8/13/13
Instruments and Controls
5-37
Entering the Feature
Settings Menu
1. Turn the ignition on and place
the vehicle in P (Park).
To avoid excessive drain on the
battery, it is recommended that
the headlamps are turned off.
2. Press
U
to scroll through the
available customizable options.
Feature Settings Menu Items
The following are customization
features that allow you to program
settings to the vehicle:
DISPLAY IN ENGLISH
This feature will only display if a
language other than English has
been set. This feature allows you to
change the language in which the
DIC messages appear to English.
Press
U
until the PRESS
V
TO
DISPLAY IN ENGLISH screen
appears on the DIC display. Press
V
once to display all DIC messages
in English.
DISPLAY LANGUAGE
This feature allows you to select the
language in which the DIC
messages will appear.
Press
U
until the PRESS
V
TO
SET DISPLAY LANGUAGE screen
appears on the DIC display. Press
V
once to access the settings for
this feature. Then press
U
to scroll
through the following settings:
ENGLISH (default):
All messages
will appear in English.
FRANCAIS:
All messages will
appear in French.
ESPANOL:
All messages will
appear in Spanish.
PORTUGUESE:
All messages will
appear in Portuguese.
NO CHANGE:
No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
AUTO DOOR LOCK
This feature allows you to select
when the vehicle's doors will
automatically lock. See
Automatic
Door Locks on page 2-6
.
Press
U
until PRESS
V
TO SET
AUTO DOOR LOCK appears on the
DIC display. Press
V
once to
access the settings for this feature.
Then press
U
to scroll through the
following settings:
SHIFT OUT OF PARK (default):
The doors will automatically lock
when the vehicle is shifted out of
P (Park).
AT VEHICLE SPEED:
The doors
will automatically lock when the
vehicle speed is above 13 km/h
(8 mph) for three seconds.
NO CHANGE:
No change will be
made to this feature. The current
setting will remain.
To select a setting, press
V
while
the desired setting is displayed on
the DIC.
