Black plate (22,1)
Chevrolet Corvette Owner Manual - 2013 - 1st crc - 3/9/12
7-22
Infotainment System
If an unwanted number is
recognized by the system, say
“
Clear
”
at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“
Verify
”
at any time.
1. Press and hold
b
/
g
for
two seconds.
2. Say
“
Digit Dial.
”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say
“
Dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Using the
“
Re-dial
”
Command
1. Press and hold
b
/
g
for
two seconds.
2. After the tone, say
“
Re-dial.
”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
.
Press
b
/
g
to answer the call.
For navigation radio press and
hold for two seconds.
.
Press
i
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Press
b
/
g
to answer an
incoming call when another call
is active. The original call is
placed on hold.
.
Press
b
/
g
again to return to
the original call.
.
To ignore the incoming call, no
action is required.
.
Press
i
to disconnect the
current call and switch to the call
on hold.
Three-Way Calling
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
b
/
g
.
2. Say
“
Three-way call.
”
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
b
/
g
to link all callers
together.
Ending a Call
Press
i
to end a call.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
