Chevrolet 2013 Corvette Owner'S Manual Download Page 181

Page: 181 / 410

Black plate (3,1)

Chevrolet Corvette Owner Manual - 2013 - 1st crc - 3/9/12

Infotainment System

7-3

B. Power/Volume Knob

Press to turn the system
on or off.

Turn to adjust the volume.

C. Buttons 1

−

Press to recall a favorite
station.

Press and hold to save the
current station.

D. CD Slot

{

Radio: Press to seek the
previous station. Press and
hold to scan backward
through the strongest
stations.

CD: Press to go to the
previous track. Press and
hold to go fast backward
within a track.

Radio: Press to seek the
next station. Press and
hold to scan forward
through the strongest
stations.

CD: Press to go to the next
track. Press and hold to
fast forward within a track.

G. RDM (Random)

Press to play the CD
tracks in random order.

H. RPT (Repeat)

Press to repeat the current
CD track.

(Tone Menu)

Opens the Tone
Settings menu.

MUTE

Press to mute and unmute
the system.

(Eject)

Press to eject the CD.

Auxiliary Port

3.5 mm (1/8 in) Auxiliary
Input Jack.

(Tune/Tone Menu)

Press to open the Tone
Settings menu.

Turn to manually find a
station.

N. BAND

Press to scroll through the
available bands AM, FM,
or XM if equipped.

O. CD/AUX

Press to listen to a CD or
an auxiliary source.

(Information)

Press to display
information on the current
station or track.

Q. CAT (Category)

Press to display a list of
XM categories.

Summary of Contents for 2013 Corvette



























































































































































































































































































































































































































Search results

Summary of Contents for 2013 Corvette

Reviews:

Brands by name

Popular brands

Chevrolet 2013 Corvette, Owner'S Manual

Search results

Summary of Contents for 2013 Corvette

Reviews:

Brands by name

Popular brands