Chevrolet 2010 Traverse Owner'S Manual Download Page 395

Page: 395 / 448

Vehicle Care

10-85

Dolly Towing
(Front-Wheel-Drive
Vehicles Only)

To tow a front-wheel-drive vehicle
from the front with two wheels on
the ground:

1. Put the front wheels on a dolly.

2. Move the shift lever to P (Park).

3. Set the parking brake.

4. Clamp the steering wheel in a

straight-ahead position with a
clamping device designed for
towing.

5. Remove the key from the

ignition.

6. Secure the vehicle to the dolly.

7. Release the parking brake.

Towing the Vehicle From
the Rear

Notice:

Towing the vehicle from

the rear could damage it. Also,
repairs would not be covered by
the vehicle warranty. Never have
the vehicle towed from the rear.

Do not tow the vehicle from the rear.

Summary of Contents for 2010 Traverse

































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Traverse

Reviews:

Brands by name

Popular brands

Chevrolet 2010 Traverse, Owner'S Manual

Search results

Summary of Contents for 2010 Traverse

Reviews:

Brands by name

Popular brands