Chevrolet 2010 Traverse, Owner'S Manual

Page: 243 / 448

Infotainment System 7-57
Voice Pass-Thru
Voice Pass-Thru allows access to
the voice recognition commands on
the cell phone. See the cell phone
manufacturers user guide to see if
the cell phone supports this feature.
This feature can be used to verbally
access contacts stored in the cell
phone.
1. Press and hold
b g
for
two seconds. The system
responds with
“ Ready ” followed
by a tone.
2. Say “ Bluetooth ” . The system
responds with “ Bluetooth ready ”
followed by a tone.
3. Say “ Voice ” . The system
responds with “ OK, accessing
<phone name> ” .
. The cell phone's normal
prompt messages will go
through its cycle according
to the phone's operating
instructions.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers and numbers stored
as name tags during a call. This is
used when calling a menu driven
phone system. Account numbers
can be programmed into the
phonebook for retrieval during
menu driven calls.
Sending a Number During a Call
1. Press
b g
. The system
responds with “ Ready ” followed
by a tone.
2. Say “ Dial ” . The system responds
with “ Say a number to send
tones ” followed by a tone.
3. Say the number to send.
. If the system clearly
recognizes the number it
responds with
“ OK, Sending
Number ” and the dial tones
are sent and the call
continues.
. If the system is not sure it
recognized the number
properly, it responds
“ Dial
Number, Please say yes or
no?
” followed by a tone.
If the number is correct, say
“ Yes ” . The system responds
with “ OK, Sending Number ”
and the dial tones are sent
and the call continues.
Sending a Stored Name Tag
During a Call
1. Press
b g
. The system
responds with “ Ready ” followed
by a tone.
2. Say “ Send name tag. ” The
system responds with “ Say a
name tag to send tones ”
followed by a tone.