Chevrolet 2009 Silverado Owner'S Manual Download

Page: 521 / 598

To store the jack and jack tools:

A. Wing Nut Retaining

Wheel Blocks

B. Wheel Blocks
C. Wing Nut Retaining

Tool Kit

D. Wheel Wrench and

Extensions

E. Tool Bag
F. Jack Mounting

Bracket

G. Jack
H. Bolt Retaining Wheel

Blocks

1. Put the tools (D) in the tool bag (E) and place them

in the retaining bracket (C).

2. Tighten down the wing nut (C).

3. Assemble the wheel blocks (B) and jack (G)

together with the wing nut (A) and retaining bolt (H).

4. Position the jack (G) in the mounting bracket (F).

Position the holes in the base of the jack (G) onto
the pin in the mounting bracket (F).

5. Return them to their original location in the vehicle.

For more information, refer to Removing the Spare
Tire and Tools on page 5-93 for more information.

5-111

Summary of Contents for 2009 Silverado























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2009 Silverado

Reviews:

Related manuals for 2009 Silverado

Brands by name

Popular brands

Chevrolet 2009 Silverado, Owner'S Manual

Search results

Summary of Contents for 2009 Silverado

Reviews:

Related manuals for 2009 Silverado

Brands by name

Popular brands