Chevrolet 2007 TrailBlazer Owner'S Manual Download Page 308

Page: 308 / 572

For more information on the stability messages,
see

DIC Warnings and Messages on page 220

When the StabiliTrak

system is both on and
actively controlling
the stability of the
vehicle, the StabiliTrak

light will blink for the
duration of the event.

You may also feel or hear the system working.
This is normal.

The StabiliTrak

disable

button is located on the
transmission shift
handle.

For vehicles with four-wheel drive, the StabiliTrak

system is automatically disabled in 4LO mode
and cannot be turned on until the vehicle is
switched to 2HI, 4HI, or 4AWD.

The StabiliTrak

system has three modes of

operation: STABILITRAK ON, TRACTION
CONTROL OFF, and STABILITRAK OFF.

STABILITRAK ON -The vehicle will default to
STABILITRAK ON every time the driver starts the
vehicle. The StabiliTrak

light will be off and no

DIC messages will be displayed.

TRACTION CONTROL OFF - The driver can
modify the engine speed management system by
momentarily pressing the StabiliTrak

button

on the transmission shift handle. The StabiliTrak

light will come on and TRACTION CONTROL
OFF will be displayed. For vehicles without a DIC,
the StabiliTrak

indicator light will come on.

Momentarily pressing the StabiliTrak

button

again will return the system to the STABILITRAK
ON mode.

STABILITRAK OFF - The driver can turn off
StabiliTrak

by pressing the StabiliTrak

button for

more than five seconds. The StabiliTrak

light will

come on and STABILITRAK OFF will be displayed.
For vehicles without a DIC, the StabiliTrak

indicator light will come on. Momentarily pressing
the StabiliTrak

button again will return the system

to the STABILITRAK ON mode. See StabiliTrak

Off below for more information.

308

Summary of Contents for 2007 TrailBlazer





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 TrailBlazer

Reviews:

Brands by name

Popular brands

Chevrolet 2007 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2007 TrailBlazer

Reviews:

Brands by name

Popular brands