Chevrolet 2007 TrailBlazer Owner'S Manual Download

Page: 475 / 572

3. Insert the socket

end of the
extension (C) on
a 45 degree
angle downward
into the hoist drive
shaft hole.

It is exposed when the rear gate is open and
is just above the rear bumper. Be sure the
socket end of the extension (C) connects
to the hoist shaft.

4. Turn the wheel wrench counterclockwise to

lower the spare tire. Keep turning the wheel
wrench until the spare tire can be pulled
out from under the vehicle.

If the spare tire does not lower to the ground,
the secondary latch is engaged causing
the tire not to lower. See

Secondary Latch

System on page 482

for more information.

475

Summary of Contents for 2007 TrailBlazer





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 TrailBlazer

Reviews:

Related manuals for 2007 TrailBlazer

Brands by name

Popular brands

Chevrolet 2007 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2007 TrailBlazer

Reviews:

Related manuals for 2007 TrailBlazer

Brands by name

Popular brands