Chevrolet 2007 tahoe, Owner'S Manual

Page: 187 / 634

Your panel of switches may not appear
exactly as they do in the examples above, but
they should be similar.
The switch positions on your hand-held
transmitter may be labeled, as follows:
•
A switch in the up position may be labeled
as “Up,” “+,” or “On.”
•
A switch in the down position may be
labeled as “Down,” “
−
,” or “Off.”
•
A switch in the middle position may be
labeled as “Middle,” “0,” or “Neutral.”
2. Write down the eight to 12 switch settings
from left to right as follows:
•
When a switch is in the up position,
write “Left.”
•
When a switch is in the down position, write
“Right.”
•
If a switch is set between the up and down
position, write “Middle.”
The switch settings that you wrote down in
Step 2 will now become the button strokes
you enter into the Universal Home Remote in
Step 4. Be sure to enter the switch settings
that you wrote down in Step 2, in order from
left to right, into the Universal Home Remote,
when completing Step 4.
3. From inside your vehicle, first firmly press
all three buttons at the same time for about
three seconds. Release the buttons to
put the Universal Home Remote into
programming mode.
Example of Eight Dip Switches with Three Positions
187