Chevrolet 2007 tahoe Owner'S Manual Download Page 171 | Manualshive

Page: 171 / 634

background image

Outside Power Foldaway Mirrors

If your vehicle is
equipped with outside
power foldaway mirrors,
the controls are
located on the driver’s
door armrest.

•

Press (A) to select the driver’s side mirror. Then
press the arrows located on the four-way
control pad to adjust the mirror. Press (A) again
to deselect this mirror.

•

Press (B) to select the passenger’s side mirror.
Then press the arrows located on the four-way
control pad to adjust the mirror. Press (B) again
to deselect this mirror.

•

Press (C), to fold the mirrors out to the driving
position.

•

Press (D) to fold the mirrors in to the folded
position.

If the mirrors are accidentally folded/unfolded
manually, they may shake or flutter at normal
driving speeds and may not stay in the unfolded
position. If this happens, you will need to reset the
mirrors. See “Resetting the Power Foldaway
Mirrors” next.

Resetting the Power Foldaway Mirrors

You will need to reset the power foldaway mirrors
if the following occurs:

•

The mirrors are accidentally obstructed while
folding.

•

They are accidentally manually
folded/unfolded.

•

The mirrors will not stay in the unfolded
position.

•

The mirrors shake and flutter at normal driving
speeds.

To reset the power foldaway mirrors, fold and
unfold them one time using the mirror controls.
This will reset them to their normal position.

171

«
...
169
170
171
172
173
...
»

Summary of Contents for 2007 tahoe



























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 tahoe

MagicWatch MWE800

Brand: Waeco Pages: 212

Brand: Vauxhall Pages: 323

Brand: Nav TV Pages: 3

DAF CHARGEMAX 90

Brand: Paccar Pages: 40

51 47 0 027 792

Brand: BMW Pages: 7

Brand: Ford Pages: 728

Brand: Westin Pages: 5

Brand: Linear Logic Pages: 8

Brand: Air Lift Pages: 28

Brand: Dolphin Pages: 16

Brand: APS Pages: 3

Brand: Ford Pages: 458

Brand: iDataLink Pages: 6

Brand: Rugged Ridge Pages: 5

Brand: Yenkee Pages: 22

Brand: Mid America Motorworks Pages: 2

Brand: Erich Jaeger Pages: 16

Brand: Toyota Pages: 923

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands