If the system fails to turn on or activate, the
StabiliTrak
®
light along with one of the following
messages will be displayed on the Driver
Information Center (DIC): TRACTION CONTROL
OFF, SERVICE TRACTION CONTROL,
STABILITRAK OFF, SERVICE STABILITRAK. If
these DIC messages appear, make sure the
StabiliTrak
®
system has not been turned off using
the StabiliTrak
®
on/off button. Then turn the
steering wheel clockwise from the nine o’clock
position to the three o’clock position. If this clears
the message(s), your vehicle does not need
servicing. If this does not clear the message(s),
then turn the vehicle off, wait 15 seconds, and then
turn it back on again to reset the system. If any
of these messages still appear on the Driver
Information Center (DIC), your vehicle should be
taken in for service. For more information on
the DIC messages, see
Driver Information Center
(DIC) on page 258
.
The StabiliTrak
®
light
will flash on the
instrument panel cluster
when the system is
both on and activated.
You may also feel or hear the system working;
this is normal.
The traction control
disable button is located
on the instrument
panel below the climate
controls.
The traction control part of StabiliTrak
®
can be
turned off by pressing and releasing the
StabiliTrak
®
button if both systems (traction control
and StabiliTrak
®
) were previously on. To disable
both traction control and StabiliTrak
®
, press
and hold the button for five seconds.
364
Summary of Contents for 2007 Avalanche
