Chevrolet 2006 TrailBlazer Owner'S Manual Download Page 439

Page: 439 / 528

CAUTION:

(Continued)

4. Turn off the engine and do not restart

while the vehicle is raised.

5. Do not allow passengers to remain in the

vehicle.

6. Put the wheel blocks at the front and rear

of the tire farthest away from the one
being changed. That would be the tire on
the other side, at the opposite end of the
vehicle.

When your vehicle has a flat tire, use the following
example as a guide to assist you in the placement of
wheel blocks.

The following information will tell you how to use the
jack and change a tire.

5-81

Summary of Contents for 2006 TrailBlazer

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TrailBlazer

Reviews:

Brands by name

Popular brands

Chevrolet 2006 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2006 TrailBlazer

Reviews:

Brands by name

Popular brands