Chevrolet 2006 TrailBlazer Owner'S Manual Download Page 108

Page: 108 / 528

Shifting into NEUTRAL

Before shifting the transfer case to NEUTRAL, first
make sure the vehicle is parked so that it will not roll.

1. Set the parking brake.

2. Start the vehicle.

3. Put the transmission in NEUTRAL (N).

4. Shift the transfer case to Two-Wheel High.

5. Turn the transfer case knob all of the way past

Four-Wheel Low and hold it there for a minimum
of 10 seconds. The neutral indicator light will
come on.

6. With the engine running, shift the transmission to

REVERSE (R) for one second, then shift the
transmission to DRIVE (D) for one second, to
ensure that the transfer case is in NEUTRAL.

7. Turn the engine off, by turning the key to

ACCESSORY.

8. Place the transmission shift lever in PARK (P).

9. Turn the ignition to LOCK.

Shifting Out of NEUTRAL

To shift the transfer case out of NEUTRAL, do the
following:

1. Set the parking brake and apply the regular

brake pedal.

2. Turn the ignition to RUN with the engine off.

3. Put the transmission in NEUTRAL (N).

4. Turn the transfer case knob to the desired position

(Two-Wheel High, Four-Wheel High, or Auto
Four-Wheel Drive).

5. After the transfer case has shifted out of NEUTRAL,

the indicator light will go out.

6. Release the parking brake.

7. Start the engine and shift the transmission to the

desired position.

All-Wheel Drive

For the All-Wheel Drive System, See All-Wheel Drive
(AWD) System (TrailBlazer SS) on page 4-14 for
more information.

2-30

Summary of Contents for 2006 TrailBlazer

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TrailBlazer

Reviews:

Brands by name

Popular brands

Chevrolet 2006 TrailBlazer, Owner'S Manual

Search results

Summary of Contents for 2006 TrailBlazer

Reviews:

Brands by name

Popular brands