Chevrolet 2005 Malibu Owner'S Manual Download Page 342

Page: 342 / 434

To replace one of these bulbs, do the following:

1. Open the hood. See

Hood Release on page 5-11

for more information.

2. Remove the two bolts attaching the headlamp

assembly to the vehicle.

3. Remove the headlamp assembly from the vehicle

by pulling it forward. Use care not to scratch the
vehicle with the lamp or the lamp with the fender.

4. Remove the rubber covers (A, B, C) from the

individual sockets.

5. Unclip the wiring

harness and twist the
socket less than
one-quarter turn
counterclockwise and
remove it.

5-42

Summary of Contents for 2005 Malibu



















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Malibu

Reviews:

Brands by name

Popular brands

Chevrolet 2005 Malibu, Owner'S Manual

Search results

Summary of Contents for 2005 Malibu

Reviews:

Brands by name

Popular brands