Chevrolet 2005 Malibu Owner'S Manual Download Page 292

Page: 292 / 434

Dinghy Towing

To tow your vehicle with all four wheels on the ground,
follow these steps:

1. Position the vehicle to tow and then secure it.

2. Turn the ignition switch to off.

3. Set the parking brake.

4. To prevent your battery from draining while the

vehicle is being towed, remove the following
fuse from the engine compartment fuse
block: 20 IBCM 1. See “Engine Compartment Fuse
Block” under

Fuses on page 5-83

5. Turn the ignition switch to ACC.

6. Shift your transaxle to NEUTRAL (N).

7. Release the parking brake.

Remember to install the fuses once you reach your
destination. To reinstall a fuse do the following:

1. Set the parking brake.

2. Remove the key from the ignition switch.

3. Reinstall the fuse.

Notice:

If you exceed 65 mph (105 km/h) while

towing your vehicle, it could be damaged. Never
exceed 65 mph (105 km/h) while towing your vehicle.

4-36

Summary of Contents for 2005 Malibu



















































































































































































































































































































































































































































Search results

Summary of Contents for 2005 Malibu

Reviews:

Brands by name

Popular brands

Chevrolet 2005 Malibu, Owner'S Manual

Search results

Summary of Contents for 2005 Malibu

Reviews:

Brands by name

Popular brands