Chevrolet 2005 Impala Owner'S Manual Download Page 54 | Manualshive

Page: 54 / 392

Chevrolet 2005 Impala Owner'S Manual Download Page 54

5. Pull the rest of the shoulder belt all the way out of

the retractor to set the lock.

6. To tighten the belt, push down on the child restraint,

pull the shoulder portion of the belt to tighten the
lap portion of the belt and feed the shoulder
belt back into the retractor. You may find it helpful
to use your knee to push down on the child
restraint as you tighten the belt.

7. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety
belt will move freely again and be ready to work for an
adult or larger child passenger.

1-48

«
...
52
53
54
55
56
...
»

Summary of Contents for 2005 Impala









































































































































































































































































































































































































Reviews:

No comments