Chevrolet 2005 Impala Owner'S Manual Download Page 51 | Manualshive

Page: 51 / 392

Chevrolet 2005 Impala Owner'S Manual Download Page 51

If your child restraint does not have the LATCH system,
you will be using the lap-shoulder belt to secure the
child restraint in this position. Be sure to follow the
instructions that came with the child restraint. Secure
the child in the child restraint when and as the
instructions say.

1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or
around the restraint. The child restraint instructions
will show you how.

3. Buckle the belt. Make sure the release button is

positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

4. Pull the rest of the shoulder belt all the way out of

the retractor to set the lock.

1-45

«
...
49
50
51
52
53
...
»

Summary of Contents for 2005 Impala









































































































































































































































































































































































































Reviews:

No comments