Chevrolet 2004 Blazer Owner'S Manual Download Page 365

Page: 365 / 454

1. Put the tire on the ground at the rear of the vehicle,

with the valve stem pointed down and to the rear.

2. Pull the retainer through the wheel.

3. Put the chisel end of the wheel wrench, on an

angle, through the hole in the rear bumper and
into the hoist shaft.

4. Raise the tire fully against the underside of the

vehicle by turning the wrench clockwise until you
hear two clicks or feel it skip twice. The spare
tire hoist cannot be overtightened.

5. Make sure the tire is stored securely. Push, pull,

and then try to rotate or turn the tire. If the tire
moves, use the wheel wrench to tighten the cable.

Follow this diagram for the inside-mounted
spare.

5-89

Summary of Contents for 2004 Blazer







































































































































































































































































































































































































































































Search results

Summary of Contents for 2004 Blazer

Reviews:

Related manuals for 2004 Blazer

Brands by name

Popular brands

Chevrolet 2004 Blazer, Owner'S Manual

Search results

Summary of Contents for 2004 Blazer

Reviews:

Related manuals for 2004 Blazer

Brands by name

Popular brands