Chevrolet 2004 Blazer Owner'S Manual Download Page 100

Page: 100 / 454

Shifting to NEUTRAL

To shift the transfer case to NEUTRAL, first make sure
the vehicle is parked so that it will not roll:

1. Set the parking brake.

2. Start the vehicle.

3. Connect the vehicle to the towing vehicle.

4. Put the transmission in NEUTRAL (N) or have the

clutch pedal pressed for vehicles with manual
transmission.

5. Shift the transfer case to 2HI.

6. Simultaneously press and hold the 2HI and 4LO

buttons for 10 seconds. The NEUTRAL light will
come on when the transfer case shift to NEUTRAL
is complete.

7. Shift the transmission to REVERSE (R) for one

second, then shift the transmission to DRIVE (D)
for one second or FIRST (1) for vehicles with
manual transmission.

8. Turn the ignition to OFF.

9. Place the transmission shift lever in PARK (P) or

FIRST (1) for vehicles with manual transmission.

10. Release the parking brake prior to towing.

Shifting out of NEUTRAL

To shift out of NEUTRAL:

1. Set the parking brake and apply the regular brake

pedal.

2. Start the vehicle with the transmission in PARK (P)

or FIRST (1) for vehicles with manual transmission.

3. Press the button for the desired transfer case

position (2HI, 4HI, AUTO 4WD or 4LO).

4. Put the transmission in NEUTRAL (N) or press the

clutch pedal for vehicles with manual transmission.

5. Shift the transmission lever to the desired position.

After the transfer case has shifted out of NEUTRAL,
the NEUTRAL light will go out.

A re-engagement sound is normal when shifting out of
NEUTRAL

2-34

Summary of Contents for 2004 Blazer







































































































































































































































































































































































































































































Search results

Summary of Contents for 2004 Blazer

Reviews:

Related manuals for 2004 Blazer

Brands by name

Popular brands

Chevrolet 2004 Blazer, Owner'S Manual

Search results

Summary of Contents for 2004 Blazer

Reviews:

Related manuals for 2004 Blazer

Brands by name

Popular brands